Skip to main content

Free Shipping on Domestic Orders $75+

Nabi Jr Speakers Replacement

What you need

    1. Nabi Jr Speakers Replacement, Rear Case: step 1, image 1 of 1
      • Remove the red rubber case from the device. This should come off with ease.

      Ask FixBot

      Add Comment

    2. Nabi Jr Speakers Replacement: step 2, image 1 of 1
      • Turn the device so the screen is facing away from you.

      • Using a philips head, size #00, screwdriver, remove the screws in each corner of the plastic casing.(total of 4 screws)

      Ask FixBot

      Add Comment

    3. Nabi Jr Speakers Replacement: step 3, image 1 of 1
      • Remove the device casing using a small plastic pry bar.

      • This might take a little bit of force to accomplish, don't be afraid to go at it with a little gusto.

      Ask FixBot

      Add Comment

    4. Nabi Jr Speakers Replacement: step 4, image 1 of 1
      • After loosening the back cover, remove it from the device so you can get at the innards.

      Ask FixBot

      Add Comment

    1. Nabi Jr Speakers Replacement, Speakers: step 5, image 1 of 1
      • The speakers are located near the top of the device close to the camera.

      • Using a desoldering tool, remove the speakers from the pads they are soldered to.

      • Note that the red wire is removed from the pad labeled with a "+" and the black wire comes from the pad labeled with a "-".

      • Solder the new speaker's wires onto their respective pads

      Ask FixBot

      Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Tobias Young

Member since: 03/24/15

27 Reputation

2 Guides authored

Team

0 Guide Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 4

Past 30 Days: 25

All Time: 1,129