NPET K10V3 Kickstand Replacement
Last updated on Jun 25, 2024
Views: 281
View statistics:
- Past 24 Hours:
- 2
- Past 7 Days:
- 14
- Past 30 Days:
- 47
- All Time:
- 281
Comments: 0
No one has left comments on this guide. Will you be first?
Go to guide commentsCompleted: 0 1
No one has marked this guide "completed." Will you be the first?
1 person has marked this guide "completed." It's you — great job!
Favorites: 0 1
No one has favorited (and subscribed to) this guide. Will you be the first?
1 person has favorited (and subscribed to) this guide — and that's you!
Better Introduction
Improve this guide by completing or revising its introduction.
Missing Details
Some of this guide's details are missing. Help users by adding tools, difficulty, or time.
What you need
Tools
-
-
-
Flip the keyboard over so the bottom is facing upwards.
-
Remove five 4.5 mm screws using a Phillips #2 screwdriver.
-
Remove three 9 mm screws using a Phillips #2 screwdriver.
Ask FixBot
-
-
-
To reassemble your device, follow these instructions in reverse order.
