This translation was generated by a machine and has not been reviewed by a person yet. Speak this language? Review it.
Muller Intuitiv Module Teardown
Eve Redero and one other contributor
Last updated on Sep 2, 2026
Views: 356
View statistics:
- Past 24 Hours:
- 3
- Past 7 Days:
- 7
- Past 30 Days:
- 56
- All Time:
- 356
Comments: 0
No one has left comments on this guide. Will you be first?
Go to guide commentsCompleted: 1 2
1 person has marked this guide "completed." Will you be next?
2 people have marked this guide "completed." Including you — great job!
Favorites: 0 1
No one has favorited (and subscribed to) this guide. Will you be the first?
1 person has favorited (and subscribed to) this guide — and that's you!
Community-Contributed Guide
An awesome member of our community made this guide. It was not created by iFixit staff.
Introduction
Go to step 1 ↓This guide shows you how to disassemble the Muller Intuitiv Module to access its circuit board.
What you need
Tools
-
Sèche cheveuxOptional
-
-
-
-
-
Peel off the label from the front panel
-
Heating with a hair dryer can help soften the adhesive
Ask FixBot
-
-
-
The device is closed by 2 medium Phillips screws
-
Remove the screws and it opens without difficulty
-
-
-
Microcontroller unit: STMicroelectronics STM32F412RG
-
WiFi and Bluetooth SiP module: Ampak AP6212
-
SPI flash memory: Adesto 25SF641
-
2.4 GHz RF transceiver: Microchip (formerly Atmel) ATSAMR21E18A
-
Buck/boost: STMicroelectronics VIPER013LS
-
3.3V LDO: OnSemi NCP1117
-
-
-
-
4A Triac: STMicroelectronics T435
-
Triac driver optocoupler: OnSemi MOC3063M
-
-
To reassemble your device, follow the instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
