This translation may not reflect the most recent updates from the source guide. Help update the translation or view the source guide.
What you need
-
-
-
The case seen from the back, with the jacks where to connect your handsets
-
-
-
Enough to redo a shell in case of problems, but without the feet.
-
The T14 snake-eyes tip to disassemble the facade.
-
Collars to block the jacks of your handsets under the shell.
-
Replacement snake eyes M6 screws, M6 inserts to remake a shell
-
-
-
-
Use the tip to disassemble the screws.
-
DO IT MANUALLY!!!
-
Not to the screwdriver, because it will rip. And the tip will damage the facade.
-
-
-
To block the jacks of the handsets: make a knot on the collar.
-
Thus, users will not be able to disconnect the handsets
-
-
-
If you want to redo a shell:
-
You have to cut the inserts, and pierce the bottom to pass the usb plug and the jack that connects to the tablet.
-
Take the model delivered as an example
-
-
-
To change the content of the micro SD card:
-
You must disassemble the facade, remove the tablet from the shell and open the "SD card" hatch
-
Create a file named: sexbreizh.avi
-
AVI container, mp3 audio codec, xvid video codec
-
Audio bitrate: 44100
-
Video rate: 8000
-
Ask FixBot
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
7 other people completed this guide.
Special thanks to these translators:
90%
These translators are helping us fix the world! Want to contribute?
Start translating ›
