Fix Your Stuff Community Store

Free Shipping on Domestic Orders $75+

Motorola V60s Button Key Board Replacement

Introduction

This guide describes how to replace the button key board, or the processor that interprets key pad information.

What you need

  1. Motorola V60s Button Key Board Replacement, Battery: step 1, image 1 of 3 Motorola V60s Button Key Board Replacement, Battery: step 1, image 2 of 3 Motorola V60s Button Key Board Replacement, Battery: step 1, image 3 of 3

    • Push in release lever towards top of phone, then use blue spudger to pry case off.

    • After case is removed from the back of the phone, you can simply use your hands to take it the rest of the way off.

    • Set cover aside in a safe location.

    Edit

  2. Motorola V60s Button Key Board Replacement: step 2, image 1 of 2 Motorola V60s Button Key Board Replacement: step 2, image 2 of 2

    • Carefully grab battery towards bottom of phone.

    • Lift from bottom and take out of phone, set aside in a safe location.

    Edit

  3. Motorola V60s Button Key Board Replacement, Motherboard: step 3, image 1 of 2 Motorola V60s Button Key Board Replacement, Motherboard: step 3, image 2 of 2

    • Remove the four corner screws with a T6 screwdriver.

    • The two top screws are short and silver. The two bottom screws are black and long.

    Edit

  5. Motorola V60s Button Key Board Replacement: step 4, image 1 of 3 Motorola V60s Button Key Board Replacement: step 4, image 2 of 3 Motorola V60s Button Key Board Replacement: step 4, image 3 of 3

    • Use a spudger to gently pry off back chassis. Wedge the spudger in crevice between back panel and phone and lift.

    Edit

  6. Motorola V60s Button Key Board Replacement: step 5, image 1 of 3 Motorola V60s Button Key Board Replacement: step 5, image 2 of 3 Motorola V60s Button Key Board Replacement: step 5, image 3 of 3

    • Starting from left side of phone, remove side buttons and place aside.

    • There are three buttons. One on each side, and the top.

    • Return phone to starting orientation when done.

    Edit

  7. Motorola V60s Button Key Board Replacement: step 6, image 1 of 3 Motorola V60s Button Key Board Replacement: step 6, image 2 of 3 Motorola V60s Button Key Board Replacement: step 6, image 3 of 3

    • Gently remove orange ribbon cable by prying up with spudger.

    Edit

  8. Motorola V60s Button Key Board Replacement: step 7, image 1 of 2 Motorola V60s Button Key Board Replacement: step 7, image 2 of 2

    • Use a spudger to pry up logic board by wedging in between logic board and chassis and lifting.

    • Orange ribbon cable is fragile and can be broken.

    Edit

  9. Motorola V60s Button Key Board Replacement, Button Key Board: step 8, image 1 of 2 Motorola V60s Button Key Board Replacement, Button Key Board: step 8, image 2 of 2

    • Insert an opening tool under the button board and gently lift.

    Edit
Conclusion

To reassemble your device, follow these instructions in reverse order.

We hope that your Button Key Board replacement was successful and that your Motorola V60s is working as it should be. For any post-repair issues, please visit our troubleshooting page or visit iFixit’s Community Answers forum!

Author

with 7 other contributors

Eric Freeman

Member since: 01/26/10

12 Reputation

7 Guides authored

Badges: 9

+6 more badges

Team

Cal Poly, Team 8-48, Regan Winter 2010 Member of Cal Poly, Team 8-48, Regan Winter 2010

CPSU-REGAN-W10S8G48

4 Members

13 Guides authored

0 Guide Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 6

Past 30 Days: 22

All Time: 1,507