What you need
-
-
Remove the back cover by sliding the clip and lifting up the bottom of the cover.
Ask FixBot
-
-
-
Once all four screws are removed, you should be able to pop off the back half of the phone.
-
-
-
-
Peal the back of the keypad off of the phone. (Highlighted area are the parts where you can begin to peal from). That white pad is what is being replaced.
-
-
-
Take your new key pad and line the holes up with the pegs sticking out of the phone. (Pegs are highlighted).
-
Secure the rest of the key pad.
-
-
-
Snap the front and back of the phone back together and reinsert screws 1 through 4.
-
To reassemble your device, follow these instructions in reverse order.
Team
UMass Dartmouth, Team 6-7, Vijaybhaskar Fall 2014 Member of UMass Dartmouth, Team 6-7, Vijaybhaskar Fall 2014
UMASSD-VIJAYBHASKAR-F14S6G7
3 Members
8 Guides authored
