Modal MD-SPBT01 USB Port Protector Replacement
thomas roacho and 3 other contributors
Last updated on Dec 22, 2015
Views: 839
View statistics:
- Past 24 Hours:
- 3
- Past 7 Days:
- 19
- Past 30 Days:
- 83
- All Time:
- 839
Comments: 0
No one has left comments on this guide. Will you be first?
Go to guide commentsCompleted: 1 2
1 person has marked this guide "completed." Will you be next?
2 people have marked this guide "completed." Including you — great job!
Favorites: 0 1
No one has favorited (and subscribed to) this guide. Will you be the first?
1 person has favorited (and subscribed to) this guide — and that's you!
Introduction
Go to step 1 ↓A faulty or broken USB port protector is a technical hazard that leads to internal damaging. This guide allows one to successfully replace the plastic USB port protector.
-
-
-
Make sure there is no unwanted debris located in the USB charging port and the hole that holds the protector in place.
Ask FixBot
-
-
-
Align the port protector with the port protecting hole that keeps the plastic covering in place.
-
-
-
-
Firmly insert the cone shaped attachment to the holding port and press the entire protector into place.
-
-
Cancel: I did not complete this guide.
One other person completed this guide.
Team
Sam Houston State, Team 2-4, Blackburne Fall 2015 Member of Sam Houston State, Team 2-4, Blackburne Fall 2015
SHSU-BLACKBURNE-F15S2G4
3 Members
48 Guides authored
