Introduction
For this guide, we will be opening up the speaker and taking the defective LED wiring out so the light works again.
What you need
-
-
-
Use your plastic opening tool to pry the metal speaker cover off.
Ask FixBot
-
-
-
-
With the screws removed, you can now remove the top piece of the speaker to gain access to the interior.
-
-
-
Locate the LED wire connection and remove it from the mother board.
-
To make replacing the LED wiring easier, remove the speaker wire to fully disconnect the speaker from the mother board.
-
-
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Team
Sam Houston State, Team 2-4, Blackburne Fall 2015 Member of Sam Houston State, Team 2-4, Blackburne Fall 2015
SHSU-BLACKBURNE-F15S2G4
3 Members
48 Guides authored
