Mitsubishi WD57734 Back Panel Replacement
Herman Chai and 5 other contributors
Last updated on Jan 28, 2014
Views: 1.5K
View statistics:
- Past 24 Hours:
- 2
- Past 7 Days:
- 13
- Past 30 Days:
- 85
- All Time:
- 1,461
Comments: 0
No one has left comments on this guide. Will you be first?
Go to guide commentsCompleted: 0 1
No one has marked this guide "completed." Will you be the first?
1 person has marked this guide "completed." It's you — great job!
Favorites: 4 5
4 people have favorited (and subscribed to) this guide. Will you be next?
5 people have favorited (and subscribed to) this guide — including you!
Action Shots
Be an action hero! This guide needs images that better demonstrate how to perform specific actions.
Needs Better Images
Better photos will improve this guide. Help out by taking, editing, or uploading new ones!
Introduction
Go to step 1 ↓Installing a new back panel in this television is straightforward and requires minimal disassembly.
What you need
Tools
-
-
-
Pull the lamp access panel off of the back panel of the television by pulling straight back on the left side of the panel near the screw then pulling to the left.
-
-
-
Loosen the two Phillips #2 screws securing the lamp housing to the television until the screws will swivel vertically.
-
-
-
-
-
Remove the following 8 Phillips #1 screws:
-
One 22 mm Phillips #1 in the bottom right corner of the back panel.
-
One 18 mm Phillips #1 in the top middle of the back panel.
-
Six 18 mm Phillips #1 in the rest of the back panel.
-
-
-
Pull the back panel off of the television by gripping the sides and rotating it down.
-
-
Ask FixBot
To reassemble your device, follow these instructions in reverse order.
Team
Cal Poly, Team 18-39, Regan Fall 2012 Member of Cal Poly, Team 18-39, Regan Fall 2012
CPSU-REGAN-F12S18G39
4 Members
72 Guides authored
