Minolta QTsi Maxxum Lens Replacement - iFixit Repair Guide

Free Shipping on Domestic Orders $75+

Introduction

Replace the back piece of glass so that your pictures will be clear of scratches and cracks.

What you need

Step 1 Lens

Minolta QTsi Maxxum Lens Replacement, Lens: step 1, image 1 of 2

Minolta QTsi Maxxum Lens Replacement, Lens: step 1, image 2 of 2

The lens release button is located on the right front side of the camera.
Remove the lens from the camera by pushing the lens release button.

Ask FixBot

Step 2

Minolta QTsi Maxxum Lens Replacement: step 2, image 1 of 1

The detached module has multiple screws that must be removed in order to reach the lens.
Once detached, remove the (4) black Phillips #00 5mm screws from the outer rim of the module.
Next, remove the (2) remaining black Phillips #00 5mm screws.

Ask FixBot

Step 3

Minolta QTsi Maxxum Lens Replacement: step 3, image 1 of 2

Minolta QTsi Maxxum Lens Replacement: step 3, image 2 of 2

Once all screws have been removed, take the back piece off of the lens and replace it.
This piece should come off easily without using any tools.
There is film underneath the last 2 screws that are removed so be careful when taking it out because it could rip.

Ask FixBot

Conclusion

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

with 2 other contributors

Jordan Ellery

Member since: 10/10/16

388 Reputation

3 Guides authored

Team

Sam Houston State, Team 12-4, Blackburne Fall 2016 Member of Sam Houston State, Team 12-4, Blackburne Fall 2016

SHSU-BLACKBURNE-F16S12G4

4 Members

5 Guides authored

0 Guide Comments

View Statistics:

Past 24 Hours: 0

Past 7 Days: 3

Past 30 Days: 42

All Time: 969