Minolta Maxxum STsi Clock Battery Replacement
Conner Lawston and 4 other contributors
Last updated on May 7, 2024
Views: 1.6K
View statistics:
- Past 24 Hours:
- 3
- Past 7 Days:
- 20
- Past 30 Days:
- 89
- All Time:
- 1,567
Comments: 2
2 guide comments.
Go to guide commentsCompleted: 0 1
No one has marked this guide "completed." Will you be the first?
1 person has marked this guide "completed." It's you — great job!
Favorites: 0 1
No one has favorited (and subscribed to) this guide. Will you be the first?
1 person has favorited (and subscribed to) this guide — and that's you!
Introduction
Go to step 1 ↓If the camera's internal clock has stopped working or showing time, it may be necessary to replace the clock battery on the inside of the camera.
-
-
-
Press up firmly on the back-cover release on the right side of the camera to release the back panel.
Ask FixBot
-
-
Tool used on this step:Tweezers$4.99
-
Use tweezers to lift off the battery compartment cover.
-
-
-
-
Use tweezers to take out the old clock battery and replace it with a new one.
-
-
To reassemble your device, follow these instructions in reverse order.
2 Guide Comments
Will the camera itself stop working if there is no clock battery?
nope. it’s don’t stop working without clock battery
