Minolta Maxxum STsi Back Clock Button Replacement
Jacobe Labog and 4 other contributors
Last updated on May 7, 2024
Views: 924
View statistics:
- Past 24 Hours:
- 3
- Past 7 Days:
- 20
- Past 30 Days:
- 93
- All Time:
- 924
Comments: 0
No one has left comments on this guide. Will you be first?
Go to guide commentsCompleted: 0 1
No one has marked this guide "completed." Will you be the first?
1 person has marked this guide "completed." It's you — great job!
Favorites: 0 1
No one has favorited (and subscribed to) this guide. Will you be the first?
1 person has favorited (and subscribed to) this guide — and that's you!
Introduction
Go to step 1 ↓This guide will show you how to replace the back clock button for your Minolta Maxxum STsi.
What you need
Tools
-
Tweezers4.9
-
-
-
Open the back panel by firmly pressing up on the back-cover release on the lower right side of the camera.
Ask FixBot
-
-
-
Remove the black case by gently lifting it with your fingers and rotating counterclockwise.
-
-
-
Remove the five black Phillips #00 2.5 mm screws from the back panel.
-
Also remove the two black Phillips #00 5.0 mm screws from the back panel.
-
-
Tool used on this step:Tweezers$4.99
-
Use the tweezers to carefully peel back the adhesive foam connecting the back panel to the case and remove the panel.
-
-
-
To reassemble your device, follow these instructions in reverse order.
Team
Cal Poly, Team 14-12, Amido Spring 2015 Member of Cal Poly, Team 14-12, Amido Spring 2015
CPSU-AMIDO-S15S14G12
3 Members
84 Guides authored
