Minolta Dimage Xt Capture Button Replacement
Megan Milam and 6 other contributors
Last updated on May 7, 2024
Views: 1.1K
View statistics:
- Past 24 Hours:
- 2
- Past 7 Days:
- 18
- Past 30 Days:
- 95
- All Time:
- 1,141
Comments: 2
2 comments on steps.
Completed: 0 1
No one has marked this guide "completed." Will you be the first?
1 person has marked this guide "completed." It's you — great job!
Favorites: 0 1
No one has favorited (and subscribed to) this guide. Will you be the first?
1 person has favorited (and subscribed to) this guide — and that's you!
Inconsistent Images
Updating the images on this guide to be more consistent with the prerequisites would increase its awesomeness.
Introduction
Go to step 1 ↓This guide disassembles the capture button, so the device can be checked for a broken spring or for debris blocking its movement.
What you need
Tools
-
Tweezers4.9
-
-
-
Then, carefully pry apart the front and back outer casing away from the internal components.
-
-
-
Tool used on this step:Tweezers$4.99
-
Choosing the front half of the casing, locate the capture button on the top.
-
Using tweezers, apply pressure to the two black hooks (circled in red) while holding the button down from the outside of the case.
-
-
-
-
The button will spring free. The capture device consists of the plastic button and a small metal spring.
-
The button can be reassembled by using the tweezers to place the spring rectangle-side down on the button and snapping the button back into place.
-
-
Ask FixBot
Reassemble the casing by reversing steps 1 and 2.
Team
Clemson, Team 12-4, Benson Spring 2013 Member of Clemson, Team 12-4, Benson Spring 2013
CLEM-BENSON-S13S12G4
3 Members
84 Guides authored
