Introduction
How to disassemble Microsoft Lumia 435 and change / replace the broken LCD Display.
What you need
Video Overview
-
-
-
Switch off the phone.
-
Remove the battery and any inserted SIM and memory cards.
-
Use a screwdriver Torx T6 and remove the 4x black screws.
Ask FixBot
-
-
-
There are several plastic locking clips hold the back cover to the frame.
-
Use a tool with a sharp edge to unlock them and a plastic tool to separate the back cover.
-
-
-
-
-
Unhook:
-
the touch screen flex cable
-
the LCD Display flex cable
-
Use a plastic tool lift up and remove the Logic board.
-
-
-
-
-
-
The Display metal shield is locked to the frame by 4x locking clips.
-
Use a tool with a sharp tip and careful unlock them and remove the shield.
-
-
-
The display is stuck tovthe touch screen glass with a double-sided adhesive tape.
-
Use a hair dryer or hot air gun and worm the glass to make adhesive soften.
-
-
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
5 other people completed this guide.
Team
2 Guide Comments
كيف اقوم بفك الهاتف وفحص الخلل الذي يوجد فيه .اعني ان هاتفي لا يقبل العمل اظن انه محروق كيف افحصه ؟
How do I remove the phone and to inspect the defect in which the .ani there is a telephone that does not accept the work I think it's seared how it checked ?
I am pretty sure he didn’t use ifixit stuff to fix the screen, lmao
