Marshall Kilburn Battery Replacement
Kai Hattan and 3 other contributors
Last updated on Apr 8, 2024
Views: 10K
View statistics:
- Past 24 Hours:
- 2
- Past 7 Days:
- 19
- Past 30 Days:
- 108
- All Time:
- 10,292
Comments: 4
4 guide comments.
Go to guide commentsCompleted: 2 3
2 people have marked this guide "completed." Will you be next?
3 people have marked this guide "completed." Including you — great job!
Favorites: 0 1
No one has favorited (and subscribed to) this guide. Will you be the first?
1 person has favorited (and subscribed to) this guide — and that's you!
Introduction
Go to step 1 ↓The rechargeable battery used in this device is one of the components most likely to fail. Fortunately the replacement process is simple and straightforward. Follow this guide for a pain-free battery replacement experience.
What you need
-
-
-
Place the unit face down as shown in the picture, exposing the battery cover.
-
Remove the two 4.0mm long screws holding the cover on using a T10 driver.
Ask FixBot
-
-
-
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
2 other people completed this guide.
Team
Oregon Institute of Technology, Team S1-G3, Lancaster Winter 2019 Member of Oregon Institute of Technology, Team S1-G3, Lancaster Winter 2019
OIT-LANCASTER-W19S1G3
4 Members
60 Guides authored
4 Guide Comments
This one should work: https://vintrons.com/products/marshall-t...
Hi, does anybody know how to recharge the battery external, because something on the platina fried (LL10) component, and it want charge through the killburn, but works fine with battery. Thank you
