Introduction
If you motor produces little torque or is dead, this guide will show you how to replace the part.
What you need
-
-
Place your fingers on the grip to pull out the battery from the device.
Ask FixBot
-
-
-
Unscrew the device using the driver from the JIS kit.
-
Use the part J1 as the Screw diver tip.
-
There are 6 screws and each have a 15 mm Phillips-head.
-
-
-
-
Pull both ends of the device to separate the motor from the rest of the device.
-
Conclusion
To reassemble your device, follow these instructions in reverse order.
