Fix Your Stuff Community Store

Free Shipping on Domestic Orders $75+

Magic Bullet MB1001B Power Cord Replacement

Introduction

Having trouble turning on your Magic Bullet? This guide will help you replace the power cord.

What you need

  1. Magic Bullet MB1001B Power Cord Replacement, Power Cord: step 1, image 1 of 1

    • Remove the four rubber pegs from the feet on the base of the Magic Bullet using the spudger.

    Edit
    Ask FixBot

  2. Magic Bullet MB1001B Power Cord Replacement: step 2, image 1 of 1

    • Remove the four 14.0 mm Phillips head screws in the feet of the base of the Magic Bullet using the Phillips #1 screwdriver.

    Edit
    Ask FixBot

  3. Magic Bullet MB1001B Power Cord Replacement: step 3, image 1 of 1

    • Remove the black base plate.

    Edit
    Ask FixBot

  5. Magic Bullet MB1001B Power Cord Replacement: step 4, image 1 of 1

    • Remove the two 13.0 mm Phillips head screws from the white plastic cable guide using a Phillips #1 screwdriver.

    Edit
    Ask FixBot

  6. Magic Bullet MB1001B Power Cord Replacement: step 5, image 1 of 1

    • Remove the white plastic cable guide.

    Edit
    Ask FixBot

  7. Magic Bullet MB1001B Power Cord Replacement: step 6, image 1 of 1

    • Remove the two crimp caps from the end of the wires.

    • You will need to purchase new crimp caps and use pliers to crimp the new crimp caps on the connected wires during reassembly.

    Edit
    Ask FixBot

  8. Magic Bullet MB1001B Power Cord Replacement: step 7, image 1 of 1

    • Separate the black wires of the power cord from the red wires on the Magic Bullet base.

    • Be sure to mark which wires are connected before separating them to ensure that they are properly reconnected during reassembly.

    Edit
    Ask FixBot
Conclusion

To reassemble your device, follow these instructions in reverse order.

2 other people completed this guide.

Author

with 5 other contributors

Bridget Carr

Member since: 10/06/15

266 Reputation

1 Guide authored

Badges: 12

+9 more badges

Team

Cal Poly, Team 12-13, Maness Fall 2015 Member of Cal Poly, Team 12-13, Maness Fall 2015

CPSU-MANESS-F15S12G13

4 Members

8 Guides authored

2 Guide Comments

I accidentally burnt through my power cord. What type of power cord do I need to replace it?

virginia.cooke - Reply Share

Where do we get a new power cord, and if that does not work, what do we do next?

davidcohnkettlebells - Reply Share

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 5

Past 30 Days: 42

All Time: 2,894