Introduction
Replacing a defective fan is pretty easy and will keep your laptop running cool.
What you need
-
-
Remove the following ten screws securing the lower case to the upper case:
-
Three 13.5 mm (14.1 mm) Phillips screws.
-
Seven 3 mm Phillips screws.
Ask FixBot
-
-
-
Using both hands, lift the lower case near the vent to pop it off two clips securing it to the upper case.
-
Remove the lower case and set it aside.
-
-
-
-
Remove three T6 Torx screws securing the right fan to the logic board and upper case.
-
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
60 other people completed this guide.
