MacBook Pro 13" Unibody Early 2011 Lower Case Replacement
Andrew Bookholt and 11 other contributors
Last updated on Aug 20, 2018
Views: 38K
View statistics:
- Past 24 Hours:
- 10
- Past 7 Days:
- 60
- Past 30 Days:
- 168
- All Time:
- 38,000
Comments: 25
25 comments on steps.
Completed: 60 61
60 people have marked this guide "completed." Will you be next?
61 people have marked this guide "completed." Including you — great job!
Favorites: 24 25
24 people have favorited (and subscribed to) this guide. Will you be next?
25 people have favorited (and subscribed to) this guide — including you!
Introduction
Go to step 1 ↓Remove the lower case to access the internal components of your MacBook Pro.
What you need
Fix Kits
These kits contain all the parts and tools needed to complete this guide.
Parts
Tools
-
-
-
Remove the following ten screws:
-
Three 14.4 mm Phillips #00 screws
-
Three 3.5 mm Phillips #00 screws
-
Four 3.5 mm shouldered Phillips #00 screws
Ask FixBot
-
-
-
Use your fingers to pry the lower case away from the body of the MacBook near the vent.
-
Remove the lower case.
-
-
-
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
60 other people completed this guide.
