MSI MS-1782 Back Cover Replacement - iFixit Repair Guide

Free Shipping on Domestic Orders $75+

Introduction

This guide is for removing the back cover of the MSI MS-1782.

What you need

1. Step 1 Back Cover
  Remove five 6.6 mm screws from the edges of the bottom cover using a JIS #1 screwdriver.
  
  Remove one 5.6 mm screw from the center of the bottom cover using a JIS #1 screwdriver.
  Edit
  
  Ask FixBot
  
  Add Comment
  
  1024
3. Step 2
  Use an iFixit opening pick to unclip the bottom cover.
  
  It is ok to run the picks along the edges since there is nothing connected to the bottom cover. It is easier to start from the sides and then work your way forward.
  
  After unclipping the bottom case, pull from the back of the laptop upwards using the lip of the bottom case as a handle.
  Edit
  
  Ask FixBot
  
  Add Comment
  
  1024

Conclusion

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

with 2 other contributors

Joshua Pizzo

Member since: 03/08/23

438 Reputation

3 Guides authored

Team

University of New Orleans, Team 4-4, McDonald Spring 2023 Member of University of New Orleans, Team 4-4, McDonald Spring 2023

UNO-MCDONALD-S23S4G4

3 Members

84 Guides authored

0 Guide Comments

View Statistics:

Past 24 Hours: 2

Past 7 Days: 11

Past 30 Days: 40

All Time: 687