Introduction
Looking for a guide to help you replace your MSI GP60 2PE Leopard hard drive? This is the guide for you. Simply follow a few steps and your hard drive will be out in no time.
What you need
-
-
Find the unlock tab located on the upper right side of the device, then slide it to the right.
-
-
-
Slide and hold the release tab on the left side of the battery, so that you can remove the battery.
-
-
-
-
Remove the four 5mm screws from the back of the device using a Phillips #00 screwdriver.
-
-
-
Remove the two 5 mm black screws on the right hand side with a Phillips #0 screwdriver.
-
-
-
Lift the hard drive, then remove from the device. There is a black strip of plastic attached to make the process easier.
-
Ask FixBot
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
3 other people completed this guide.
Team
Linn Benton Community College, Team S1-G4, Karnes Fall 2018 Member of Linn Benton Community College, Team S1-G4, Karnes Fall 2018
LBCC-KARNES-F18S1G4
4 Members
6 Guides authored
