Fix Your Stuff Community Store

Free Shipping on Domestic Orders $75+

Logitech VX Nano Wireless Mouse Opening Procedure

Introduction

Follow this guide to open a Logitech VX Nano wireless mouse for cleaning or repair.

Opening your mouse gives you access to clean its internals, troubleshoot mechanical problems, or replace a part.

What you need

  1. Logitech VX Nano Wireless Mouse Opening Procedure, Remove batteries and nano receiver: step 1, image 1 of 2 Logitech VX Nano Wireless Mouse Opening Procedure, Remove batteries and nano receiver: step 1, image 2 of 2

    • Pull down on the battery release tab to remove the battery cover.

    • Remove battery cover.

    Edit

  2. Logitech VX Nano Wireless Mouse Opening Procedure: step 2, image 1 of 2 Logitech VX Nano Wireless Mouse Opening Procedure: step 2, image 2 of 2

    • Pull the battery release tab away from the mouse so the two AA batteries come out.

    Edit

  3. Logitech VX Nano Wireless Mouse Opening Procedure: step 3, image 1 of 1

    • If the Nano Receiver is still in the mouse and not in your computer, remove it by pushing on the bright orange button. It should pop right out!

    Edit

  5. Logitech VX Nano Wireless Mouse Opening Procedure, Open the mouse: step 4, image 1 of 1

    • Find and remove the screws at the bottom of the battery compartment:

    • Two 6 mm Phillips #1 screws

    • When removing these two screws, it can be helpful to hold the plastic battery tab out of the way of your screwdriver.

    Edit

  6. Logitech VX Nano Wireless Mouse Opening Procedure: step 5, image 1 of 2 Logitech VX Nano Wireless Mouse Opening Procedure: step 5, image 2 of 2

    • Use an opening pick to get underneath the corner of one of the adhesive skates.

    • As you start to remove the skate, make sure that the opening pick is underneath the entire adhesive pad—otherwise you run the risk of splitting the pad in half.

    • Continue to push the opening pick between the adhesive and the mouse case, slowly working the adhesive away from the case.

    • Repeat this same process for the two other skates.

    • Remove any old adhesive residue before applying new mouse skates.

    Edit

  7. Logitech VX Nano Wireless Mouse Opening Procedure: step 6, image 1 of 1

    • Remove the screws from the backside of the mouse:

    • Three 6 mm Phillips #1 screws

    • The top shell and bottom case are no longer connected. Keep the mouse steady so you can carefully remove the upper shell in the next step.

    Edit

  8. Logitech VX Nano Wireless Mouse Opening Procedure: step 7, image 1 of 2 Logitech VX Nano Wireless Mouse Opening Procedure: step 7, image 2 of 2

    • Carefully separate the top plastic shell from the bottom case.

    • Remove the top shell.

    Edit
Conclusion

To reassemble your device, follow these instructions in reverse order.

Repair didn’t go as planned? Try some basic troubleshooting, or ask our Answers community for help.

Reuse or Recycle—Never put discarded electronic parts in household waste. Visit Logitech Recycling to find your nearest recycling points, including the option to mail back old devices to Logitech for free if there’s no convenient solution in your area. You can also take your e-waste to any R2 or e-Stewards certified recycler. And don’t let good working parts or repaired devices die a slow death in your sock drawer—pass them along to someone who can use them.

Share your experience—Leave a comment here or send your feedback directly to Logitech at repair@logitech.com to help shape future repair guides and product design.

Author

Carsten Frauenheim

Member since: 03/10/20

161,916 Reputation

439 Guides authored

Badges: 43

+40 more badges

0 Guide Comments

Add Comment

View Statistics:

Past 24 Hours: 1

Past 7 Days: 8

Past 30 Days: 27

All Time: 243