Introduction
Follow this guide to replace the midframe in your Logitech RS Shifter & Handbrake.
Note: You'll need a long-shank Phillips screwdriver to reach some of the screws in this repair.
What you need
-
-
Unplug the shifter's USB cable.
-
Completely unmount the shifter from the clamp and remove any accessories so you're left with just the shifter.
-
Use a 4.0 mm hex screwdriver to remove the 31 mm‑long screws securing the shifter to the clamp.
Ask FixBot
-
-
-
Twist the handle counterclockwise to unscrew and remove it.
-
-
-
Use a 2.5 mm hex screwdriver to remove the four 11 mm‑long screws securing the top cover.
-
-
-
-
Lift the top cover straight up to remove it—the metal shift gate is sitting loosely in the cover.
-
-
-
Remove the eight screws securing the chassis:
-
Four 10 mm‑long 2.5 mm hex screws
-
Four 12 mm‑long Phillips screws
-
-
-
Use a long-shank Phillips screwdriver to remove the six 12 mm‑long screws securing the midframe.
-
To reassemble your device, follow these instructions in reverse order.
Repair didn’t go as planned? Try some basic troubleshooting, or ask our Answers community for help.
