Introduction
This guide will be used to aid you in replacing the Logitech G920 Driving Force steering wheel motherboard. The steering wheel motherboard controls the inputs of all the hardware on the steering wheel, such as the XYAB buttons and D-pad. If your device is having problems related to buttons and paddles not responding, take a look at the troubleshooting guide before continuing with this guide. If you are going to continue with this guide, unplug all parts of the device from any outlets before you start.
What you need
-
-
Use the Phillips #0 screwdriver to remove the five 9.5 mm external screws.
Ask FixBot
-
-
-
Using the Phillips #0 screwdriver, remove the 5 mm screws holding the bumpers in place.
-
-
-
-
Using the TR25 Torx Security Screwdriver, remove the six 23.8 mm screws holding the face plate together.
-
Remove the face plate from the steering wheel.
-
-
-
Remove the eight 7.5 mm screws holding the steering wheel motherboard in place using a Phillips #0 screwdriver.
-
Remove the steering wheel motherboard.
-
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Team
University of North Texas, Team 2-1, Harold Fall 2023 Member of University of North Texas, Team 2-1, Harold Fall 2023
UNT-HAROLD-F23S2G1
4 Members
7 Guides authored
