What you need
-
-
-
First flip the device so its bottom side is face up. and locate the Philip #00 screw that is marked in the image.
Ask FixBot
-
-
-
-
Take out the screw that you have located in step 1.
-
You can now remove the solid state drive and replace it with a new one.
-
-
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Team
UMass Dartmouth, Team S8-G2, Valliere Spring 2018 Member of UMass Dartmouth, Team S8-G2, Valliere Spring 2018
UMASSD-VALLIERE-S18S8G2
2 Members
47 Guides authored
