Lenovo ThinkPad X280 SSD Replacement

Free Shipping on Domestic Orders $75+

Introduction

This guide will show you how to remove key parts to access the SSD. The SSD provides the laptop with external storage for performance.

SSDs have a limited lifespan, and over time, the factory-installed SSD in a laptop will age and eventually run out of usable storage. You would have to change the SSD. Getting extra data/storage provides the laptop with better performance power and space to render applications. This process should only take a maximum of 20 minutes to complete.

What you need

Step 1 Back Panel

Lenovo ThinkPad X280 SSD Replacement, Back Panel: step 1, image 1 of 1

To begin, ensure that the device is completely powered off and not connected to an energy supply.
Close the device and flip it over to expose the back panel.

Edit

Ask FixBot

Step 2

Use a Phillips #1 screwdriver to unscrew the five captive screws on the back panel until a small pop is heard.
These are captive screws and do not come out completely.

Edit

Ask FixBot

Step 3

Gently wedge an opening tool or spudger under the back panel, and loosen the clips around the perimeter until the back panel comes off.
Remove the back cover.

Edit

Ask FixBot

Step 4 SSD

Lenovo ThinkPad X280 SSD Replacement, SSD: step 4, image 1 of 2

Lenovo ThinkPad X280 SSD Replacement, SSD: step 4, image 2 of 2

Use a Phillips #1 screwdriver to remove the 3.5 mm screw securing the SSD.

Edit

Ask FixBot

Step 5

Grip the SSD on the sides with your thumb and pointer finger, pulling straight to the right side, removing it.

Edit

Ask FixBot

Conclusion

To reassemble your device, follow the above steps in reverse order.
Take your e-waste to an R2 or e-Stewards certified recycler.
Repair didn’t go as planned? Try some basic troubleshooting or ask our Answers community for help.

Cancel: I did not complete this guide.