Free Shipping on Domestic Orders $75+

Introduction

Use this guide to begin work on the inside of the Lenovo ThinkPad T14s Gen1 or to replace a faulty back panel.

This repair requires opening the device, so proceed with caution; some components may be sensitive to electrostatic discharge (ESD) or accidental damage. Consider using an anti-static mat or wrist strap to minimize ESD when repairing electronic devices.

Before you begin this repair, make sure your laptop is off and disconnected from the charger and any peripheral devices. If the computer was recently charging, unplug it and wait a few minutes for any residual power to dissipate before beginning the repair.

What you need

1. Step 1 Back Panel
  Use a Phillips #0 screwdriver to loosen the five captive screws securing the back panel.
  
  The screws are secured to the back plate with small plastic washers and cannot be fully removed.
  Edit
  
  Ask FixBot
  
  Add Comment
  
  1024
3. Step 2
  Insert the end of an iFixit opening in the space between the bottom and top case and move it around the perimeter to release the clips that hold the bottom case to the device.
  
  You may hear the clips crack or pop as you release them and remove the bottom panel.
  
  Before removing the bottom case, make sure all clips are fully released. Pulling the case away while clips are still engaged can break the clips or crack the case. Take your time and work around the edges to ensure the panel separates evenly.
  
  Remove the back panel.
  Edit
  
  Ask FixBot
  
  Add Comment
  
  1024