Lenovo Ideapad 320-15ABR Back Panel Replacement - iFixit Repair Guide

Free Shipping on Domestic Orders $75+

Introduction

This guide will show you how to disassemble the back panel for the device.

This guide is also a prerequisite guide for other hardware part replacement.

What you need

1. Step 1 Back Panel
  Before you proceed, make sure your computer is turned off and is not connected to any power source.
  
  Remove the single 7 mm Phillips #1 screw securing the optical drive.
  
  Be sure to store the screws carefully as they are easy to lose. A magnetic project mat is recommended
  Edit
  
  Ask FixBot
  
  Add Comment
  
  1024
2. Step 2
  Carefully remove the optical drive bracket by pulling the bezel away from the laptop.
  Edit
  
  Ask FixBot
  
  Add Comment
  
  1024
4. Step 3
  Using the Phillips #1 screwdriver, remove the twelve screws around the back panel from the laptop.
  Edit
  
  Ask FixBot
  
  Add Comment
  
  1024
5. Step 4
  Use an opening tool to pry out the back cover.
  Edit
  
  Ask FixBot
  
  Add Comment
  
  1024
6. Step 5
  Remove the back panel by pulling it up and away from the laptop.
  Edit
  
  Ask FixBot
  
  Add Comment
  
  1024

Conclusion

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

4 other people completed this guide.

Author

with 5 other contributors

Anurag Deb

Member since: 10/31/18

1,126 Reputation

3 Guides authored

+10 more badges

Team

Purdue University Northwest, Team S1-G5, Hingst Fall 2018 Member of Purdue University Northwest, Team S1-G5, Hingst Fall 2018

PNW-HINGST-F18S1G5

4 Members

60 Guides authored

1 Guide Comment

How Is solved Twisted screw and broken inside the frame

For laptop ip520

mohsen JUVE - May 5, 2020 Reply Share

View Statistics:

Past 24 Hours: 3

Past 7 Days: 14

Past 30 Days: 72

All Time: 15,458