-
-
Turn over the device and unmount 11 screws from the bottom.
-
Eight screws are well seen.
-
Two screws are hidden.
-
-
-
-
Remove two screws.
-
Be careful with the small parts that fall when you unscrew the screws.
-
Carefully release the cable from the tiny holder.
-
-
-
Unscrew the elements from the pictures, and you'll be able to slide out the red cylinders.
-
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
2 Guide Comments
Would it be possible to know the values of R17, R18 and BT1?
Unfortunately I don't have that information.