Lasko 4910 Filter Replacement
Julie Ling and one other contributor
Last updated on Dec 14, 2018
Views: 2.5K
View statistics:
- Past 24 Hours:
- 0
- Past 7 Days:
- 16
- Past 30 Days:
- 85
- All Time:
- 2,472
Comments: 1
1 guide comment.
Go to guide commentsCompleted: 0 1
No one has marked this guide "completed." Will you be the first?
1 person has marked this guide "completed." It's you — great job!
Favorites: 0 1
No one has favorited (and subscribed to) this guide. Will you be the first?
1 person has favorited (and subscribed to) this guide — and that's you!
Introduction
Go to step 1 ↓If the filter in the fan is dirty and needs to be replaced, use this guide to learn how to dissemble the top part of the fan and replace your filter.
What you need
Tools
-
-
-
On the backside of the fan, remove the top two 4mm Phillips #Y1 screws using PH 1 bit and Magnetic Driver
Ask FixBot
-
-
-
To reassemble your device, follow these instructions in reverse order.
Team
UC Davis, Team S11-G2, Lore Fall 2018 Member of UC Davis, Team S11-G2, Lore Fall 2018
UCD-LORE-F18S11G2
4 Members
12 Guides authored
1 Guide Comment
Thank you for taking the time to do this. A great little guide for a fan that doesn't have a lot of support. Most details are looked over in online guide material. But this one was done with professional care.
Sincerely,
Davis Steffens
Seattle, WA
davissteffens@hotmail.com
PS: I Fix-It represents more than a company providing a service. I think you are reminding everyone that we have the right to Fix. Which in these weird times is a step needed.
