Lasko 20" Wind Machine Blade Replacement
Jewel Robinson and 2 other contributors
Last updated on Jan 4, 2022
Views: 5.7K
View statistics:
- Past 24 Hours:
- 5
- Past 7 Days:
- 29
- Past 30 Days:
- 160
- All Time:
- 5,730
Comments: 5
1 comment on steps, 4 guide comments.
Go to guide commentsCompleted: 3 4
3 people have marked this guide "completed." Will you be next?
4 people have marked this guide "completed." Including you — great job!
Favorites: 0 1
No one has favorited (and subscribed to) this guide. Will you be the first?
1 person has favorited (and subscribed to) this guide — and that's you!
Introduction
Go to step 1 ↓This is my guide on how to open a 20” Lasko Wind Fan to remove or replace the blade. This guide can increase the life of the fan. It also shows you how to access the inside of the fan to clean it. This is helpful for dust build up, and prolonging the life of your fan. Also, replacing the blade can increase the life span. Be sure to turn off and unplug this device before cleaning or placing your inside of it.
What you need
Tools
-
-
-
Use the Phillips #0 screwdriver to remove four 8.8 mm screws that are marked on the back of the grill.
-
-
-
-
Grab both sides of the blade and twist counter clockwise to remove it from the base axel attached to the back grill.
-
Ask FixBot
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
3 other people completed this guide.
Team
University of Memphis, Team S52-G16, Kim Spring 2021 Member of University of Memphis, Team S52-G16, Kim Spring 2021
UM-KIM-S21S52G16
1 Member
12 Guides authored
4 Guide Comments
Recherche moteur lasko windmachin 3300
Recherche moteur lasko windmachine 3300
I HAVE TWO BOUTH DIED TWO DAY LESS THEN 2 YEARS OLD MJSKPH45@GMAIL.COM am not happy over 50 each
