LG VX6100 Keypad Replacement
Last updated on Feb 1, 2018
Views: 976
View statistics:
- Past 24 Hours:
- 2
- Past 7 Days:
- 7
- Past 30 Days:
- 35
- All Time:
- 976
Comments: 0
No one has left comments on this guide. Will you be first?
Go to guide commentsCompleted: 0 1
No one has marked this guide "completed." Will you be the first?
1 person has marked this guide "completed." It's you — great job!
Favorites: 0 1
No one has favorited (and subscribed to) this guide. Will you be the first?
1 person has favorited (and subscribed to) this guide — and that's you!
Introduction
Go to step 1 ↓This guide will explain how to remove and replace the keypad on an LG VX6100.
What you need
Tools
-
-
-
Push down on the gray "PUSH" button on the back side of the phone.
-
Slide the back case downward. Then, lift and remove the case.
Ask FixBot
-
-
Tool used on this step:Tweezers$4.99
-
Use a push-pin or tweezers to pry both of the tear-shaped screw covers out of the top of the phone.
-
-
-
Use a Phillips #00 screwdriver to unscrew the six case screws from the back of the phone.
-
-
-
Insert a plastic opener tool through the seam between the back case and the rest of the phone.
-
Slowly slide the tool along the seam. Lift up on the back case while you do this until the back case comes apart.
-
-
-
-
-
-
Gently lift up on any edge of the white keypad to remove it from the phone case.
-
To reassemble your device, follow these instructions in reverse order.
Team
Cal Poly, Team 12-39, Regan Spring 2012 Member of Cal Poly, Team 12-39, Regan Spring 2012
CPSU-REGAN-S12S12G39
3 Members
96 Guides authored
