Introduction
A guide on how to replace the logic board in the LG VX5400.
What you need
-
-
Hold the phone case in your palm and slide the back cover towards yourself using your thumb
-
-
-
Slide a tool or finger into the notch at the top of the battery to carefully remove it.
-
-
-
-
Take the Philips screwdriver and unscrew the four visible screws on the backside of the phone indicated by the four red circles.
-
-
-
Then, take the pointed end of a spudger and pry out the rubber stopper to reveal the last screw at the top indicated with the blue circle.
-
-
-
While the phone is open and faced up, carefully insert a tool into the middle to seperate the bottom half of the phone.
-
-
-
Carefully slide out the keypad and remove the logic board. Then insert new the logic board.
-
Ask FixBot
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
2 other people completed this guide.
Team
Cal Poly, Team 26-26, Regan Spring 2010 Member of Cal Poly, Team 26-26, Regan Spring 2010
CPSU-REGAN-S10S26G26
4 Members
16 Guides authored
