Introduction
Before continuing, make sure the device is powered down. Also make sure that the battery and back casing are removed.
What you need
-
-
To remove the back, insert thumbnail into MicroUSB port, and pull up to loosen back.
-
Use nail to loosen case on all four sides. Once loose, remove back case.
Ask FixBot
-
-
-
-
Once the back cover and battery are removed, use the Phillips #J000 screwdriver to remove all 11 screws located around the plastic midframe.
-
-
-
Using the plastic opening tool, carefully pry and separate the plastic midframe from the rest of the phone.
-
-
-
Locate the rear facing camera.
-
Using the plastic opening tool, pry apart the cable from where it connects to the phone.
-
-
-
After removing the ribbon cable, the camera should be easy to remove with your fingers. Remove the rear facing camera.
-
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
3 other people completed this guide.
Team
Marist, Team 1-5, Laflen Spring 2016 Member of Marist, Team 1-5, Laflen Spring 2016
MARS-LAFLEN-S16S1G5
2 Members
10 Guides authored
