Introduction
Use this guide to remove the speakers from the device.
What you need
-
-
Use the spudger to pry out the indicated rubber squares.
-
Use the #0 Phillips screwdriver to take out the revealed screws.
Ask FixBot
-
-
-
Carefully lodge the spudger between the face plate and the hinge mechanism.
-
Gently pry the face plate until it releases from place holders.
-
-
-
-
Using the spudger, pry between the speaker circuit board and base to detach with ease.
-
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
2 other people completed this guide.
Team
Cal Poly, Team 10-44, Garner Spring 2010 Member of Cal Poly, Team 10-44, Garner Spring 2010
CPSU-GARNER-S10S10G44
4 Members
27 Guides authored
