Introduction
This guide will show you how to open up your Blu-ray player and remove the power cord if it is faulty and causing problems related to powering the device.
What you need
-
-
Remove the three black 3/16” Phillips #2 screws from the backside of the player.
-
With the backside (audio/video jacks) facing you, lift the part of the cover closer to you and pull until it is off.
Ask FixBot
-
-
-
-
Detach the power supply cord from the brown logic board by pushing the locking clip on the connector, and pulling out.
-
Remove the power cord from the panel by carefully sliding it upwards from its seating.
-
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
4 other people completed this guide.
Team
UW Tacoma, Team 1-1, Rose Winter 2015 Member of UW Tacoma, Team 1-1, Rose Winter 2015
UWT-ROSE-W15S1G1
4 Members
3 Guides authored
