LG 305C Internal Casing Replacement
Ashley Kidwell and 2 other contributors
Last updated on May 22, 2018
Views: 509
View statistics:
- Past 24 Hours:
- 2
- Past 7 Days:
- 16
- Past 30 Days:
- 75
- All Time:
- 509
Comments: 0
No one has left comments on this guide. Will you be first?
Go to guide commentsCompleted: 0 1
No one has marked this guide "completed." Will you be the first?
1 person has marked this guide "completed." It's you — great job!
Favorites: 0 1
No one has favorited (and subscribed to) this guide. Will you be the first?
1 person has favorited (and subscribed to) this guide — and that's you!
Introduction
Go to step 1 ↓Before completing this replacement guide, it is important to unplug the device. This replacement guide will show how to replace the internal casing in the device.
What you need
Tools
-
-
-
Pry open the back case on the device with a plastic opening tool going around the edges of the device to ensure it is taken off with no damage then finally remove it and place it on the side.
Ask FixBot
-
-
-
Pry the battery out of the device with a plastic opening tool opposite from the plastic pieces keeping it in place and remove it gently in order to ensure that you don’t damage it.
-
-
-
-
-
Remove the three 4 mm screws using a JIS screwdriver with a J000 head from the bottom part of the internal casing.
-
-
-
Pry open the bottom part of the internal casing with the plastic opening tool and remove it.
-
-
-
-
Remove the four 4 mm screws using a JIS screwdriver with a J000 head from the top part of the internal casing.
-
-
-
Pry open the top part of the internal casing with the plastic opening tool and remove it.
-
-
To reassemble your device, follow these instructions in reverse order.
Team
IUPUI, Team S6-G1, Baechle Spring 2018 Member of IUPUI, Team S6-G1, Baechle Spring 2018
IUPUI-BAECHLE-S18S6G1
3 Members
72 Guides authored
