Introduction
The TV turns off by itself after a while or the TV will not start, blown off capacitors could be the source off error.
What you need
-
-
-
-
Check the power-board. If there are any blown-up capacitors, you should replace them.
-
For removing the capacitors, remove the board, take a soldering bolt and heat the solder points at the back of the board.
-
Insert the replacement capacitors and solder it. Check the poles!
-
Ask FixBot
Conclusion
Not all capacitors are need in any case. To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
10 other people completed this guide.
