Klipper Power On Button
David Husolo and one other contributor
Last updated on Aug 1, 2026
Views: 3.2K
View statistics:
- Past 24 Hours:
- 1
- Past 7 Days:
- 12
- Past 30 Days:
- 65
- All Time:
- 3,244
Comments: 2
2 comments on steps.
Completed: 1 2
1 person has marked this guide "completed." Will you be next?
2 people have marked this guide "completed." Including you — great job!
Favorites: 0 1
No one has favorited (and subscribed to) this guide. Will you be the first?
1 person has favorited (and subscribed to) this guide — and that's you!
Community-Contributed Guide
An awesome member of our community made this guide. It was not created by iFixit staff.
-
-
-
You will be removing the yellow and green wires from terminal 1 and 2 from step 2
-
Re-crimp the wires and using a 3 pin connector. Connect it to E1_STOP on the Duet
-
Add the commands for "output_pin psupower" "gcode_macro M80" "gcode_macro M81" and "gcode_button power_on" to your printer.cfg
-
I've uploaded my config to my github
Ask FixBot
-
-
-
Cancel: I did not complete this guide.
One other person completed this guide.
