Introduction
Kihno Kits are popular for their interactive and digital content, but over time, the battery in the device can wear out or become non-functional. With this guide, you will be able to replace the battery and be able to use it again.
What you need
-
-
Insert a spudger into the gap and pull downwards, so the top lifts up.
Ask FixBot
-
-
-
Pull out the wired component from the Kihno for better access.
-
Remove the old battery by pulling outward towards yourself, starting from the top.
-
-
-
-
Grab your new battery and place it where the old one was.
-
Angle the battery to where it is underneath the golden flap.
-
Push the rest of the battery down.
-
-
-
Place the wired components back into the Kihno.
-
Ensure the white button is sticking from the outside through its designated hole.
-
Team
California State University Bakersfield, Team 74-9, Chiang Fall 2023 Member of California State University Bakersfield, Team 74-9, Chiang Fall 2023
CSUB-CHIANG-F23S74G9
1 Member
1 Guide authored
