Skip to main content

Free Shipping on Domestic Orders $75+

Kidde Fire Sentry Smoke Detector Battery Replacement

Views: 2K

View statistics:

Past 24 Hours:
8
Past 7 Days:
43
Past 30 Days:
259
All Time:
2,020
Comments: 0

No one has left comments on this guide. Will you be first?

Go to guide comments
Completed: 0

No one has marked this guide "completed." Will you be the first?

Favorites: 0

No one has favorited (and subscribed to) this guide. Will you be the first?

Time Required: 1 - 5 minutes
Difficulty: Very easy
Kidde Fire Sentry Smoke Detector Battery Replacement

Introduction

Go to step 1 ↓

If your Kidde Fire Sentry Smoke Detector (often with the model number 0914 and 0914E or i9040) is beeping intermittently or if it has been six months since the last battery change, it’s likely time to replace the battery.

A working smoke detector is essential for early fire detection and can save lives. Most smoke detectors are designed to emit regular beeps when the battery is low, signaling that it's time for a replacement. Even if it isn’t beeping, the battery should be replaced every six months to ensure proper function.

Before beginning the replacement process, make sure to have a 9V battery on hand. This guide demonstrates how to replace the battery in a Kidde Fire Sentry Smoke Detector, though similar steps apply to many other models and brands.

What you need

Parts

Tools

    1. Kidde Fire Sentry Smoke Detector Battery Replacement, Battery: step 1, image 1 of 1
      • Place a ladder securely underneath the smoke detector.

      Ask FixBot

      Add Comment

    2. Kidde Fire Sentry Smoke Detector Battery Replacement: step 2, image 1 of 1
      • Twist the smoke detector clockwise to remove it from the ceiling.

      Ask FixBot

      Add Comment

    3. Kidde Fire Sentry Smoke Detector Battery Replacement: step 3, image 1 of 3 Kidde Fire Sentry Smoke Detector Battery Replacement: step 3, image 2 of 3 Kidde Fire Sentry Smoke Detector Battery Replacement: step 3, image 3 of 3
      • This device was missing the battery cover, but if your smoke detector has one, remove it from the bottom of the device.

      • Pull the black strap upwards to remove the old battery.

      • Dispose of the old battery properly.

      Ask FixBot

      Add Comment

    4. Kidde Fire Sentry Smoke Detector Battery Replacement: step 4, image 1 of 2 Kidde Fire Sentry Smoke Detector Battery Replacement: step 4, image 2 of 2
      • Push the red switch down with your finger.

      Ask FixBot

      Add Comment

    5. Kidde Fire Sentry Smoke Detector Battery Replacement: step 5, image 1 of 1
      • Place the new battery on top of the red switch and black strap.

      • Place the new battery in the battery compartment ensuring the red switch stays down.

      • Make sure the positive and negative sides of battery are oriented correctly.

      Ask FixBot

      Add Comment

    6. Kidde Fire Sentry Smoke Detector Battery Replacement: step 6, image 1 of 2 Kidde Fire Sentry Smoke Detector Battery Replacement: step 6, image 2 of 2
      • Press and hold button on the front for three seconds and wait for a beep.

      • After hearing a beep, stop pressing button.

      Ask FixBot

      Add Comment

    7. Kidde Fire Sentry Smoke Detector Battery Replacement: step 7, image 1 of 3 Kidde Fire Sentry Smoke Detector Battery Replacement: step 7, image 2 of 3 Kidde Fire Sentry Smoke Detector Battery Replacement: step 7, image 3 of 3
      • Find the grooves located on the back of the smoke detector.

      • Match them with the tabs hanging from the ceiling piece.

      • Twist the smoke detector counter-clockwise to secure it to the ceiling.

      Ask FixBot

      Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

lrupertus

Member since: 06/09/25

145 Reputation

1 Guide authored

0 Guide Comments

Add Comment

View Statistics:

Past 24 Hours: 8

Past 7 Days: 43

Past 30 Days: 259

All Time: 2,020