Free Shipping on Domestic Orders $75+

Introduction

The hot plate in the Keurig K-Duo is designed to keep the coffee warm after brewing. Over time, these hot plates can fail due to wear, misuse, or electrical issues. You may need to replace the hot plate if your freshly brewed coffee gets cold over a short period of time.

Here is a guide showing the steps on how to replace the hot plate so your coffee stays warm.

In this process, the skilled use of applying thermal paste is required.

What you need

Step 1 Hot Plate

Keurig K-Duo Hot Plate Replacement, Hot Plate: step 1, image 1 of 1

Turn the Keurig K-Duo upside down so the power cord is visible and facing you.

Edit

Step 2

At the top left hand corner, remove the single Phillips #1 screw that secures the plastic panel.
Remove the plastic panel.

Edit

Step 3

Keurig K-Duo Hot Plate Replacement: step 3, image 3 of 3

Remove the four Phillips #1 screws from each of the four tabs.
Pull off all four tabs which secure the hot plate in place.

Edit

Step 4

Remove two more Phillips #1 screws from the electrical heating element.

Edit

Step 5

Carefully remove the electrical heating element from the hot plate.
Remove the hot plate by tilting one side over and pulling it straight out.
When installing new hot plate, it is critical to apply thermal paste to allow good, clean contact for the heating element.
Apply thermal paste to the heating element and place on new hot plate. Wait a few minutes before reinstallation to allow the thermal paste to completely dry.

Edit

Conclusion

To reassemble your device, follow the above steps in reverse order.
Take your e-waste to an R2 or e-Stewards certified recycler.
Repair didn’t go as planned? Try some basic troubleshooting or ask our Answers community for help.