Introduction
Use this guide to replace a worn drive belt in a Kenmore 110 Series Washing Machine.
What you need
-
-
-
Using a 5/16" socket wrench, remove both screws from the belt cover.
-
Remove the belt cover from the washer.
-
-
-
Using a 1/2" socket, remove the bolt securing the drive pulley.
-
Remove the drive pulley and belt.
-
Ask FixBot
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
19 other people completed this guide.
Team
Cal Poly, Team 15-43, Forte Fall 2012 Member of Cal Poly, Team 15-43, Forte Fall 2012
CPSU-FORTE-F12S15G43
5 Members
12 Guides authored
11 Guide Comments
What would be reason that rinse cycle doesn't spin and it leaks
Will the drive belt make a clicking/grinding noise? I originally thought it was just a slipping noise, but empty it does make the grinding noise.
It makes noise like it’s working but it’s not grabbing anything
You can change your gearbox
What belt type should I use for a 110.24642300? I cannot find its belt online.
