Free Shipping on Domestic Orders $75+

Introduction

If you want to gain access to inner parts (e.g. pump or heater), you have to remove the backpanel. It is secured by two proprietary screws with oval head.

What you need

Step 1 How to open a Jura Impressa S model cover

Jura Impressa S model backpanel, How to open a Jura Impressa S model cover: step 1, image 1 of 2

Jura Impressa S model backpanel, How to open a Jura Impressa S model cover: step 1, image 2 of 2

Always remove the power cord from the wall outlet.
Lift out the coffee tray
Remove the lid sealing the coffee bean container
Remove all of the coffee beans you can possibly remove.
Pull the adjuster of the coffee bean grinder straight up
Remove the four T15 Torx screws

Translate

Ask FixBot

Step 2

Remove the cup heat plate.
It can be opened like a book.
Below the cup heat plate there are three more T15 Torx screws. Remove them.

Translate

Ask FixBot

Step 3

The top cover is now free. Lift ´er up and set ´er aside.

Translate

Ask FixBot

Step 4 Jura Impressa S model backpanel

Jura Impressa S model backpanel, Jura Impressa S model backpanel: step 4, image 1 of 3

Jura Impressa S model backpanel, Jura Impressa S model backpanel: step 4, image 2 of 3

Jura Impressa S model backpanel, Jura Impressa S model backpanel: step 4, image 3 of 3

Tool used on this step:

iFixit Precision 4 mm Screwdriver Bit

$2.99

Buy

The backpanel is secured with two proprietary screws with oval head. They seem to be rivets, but in fact are screws. The only purpose is, to keep us out of our own devices. You can remove them using an oval drive bit. (Part of some IFixit tool collections or available at a Jura provider or iFixit). In a pitch try needle nose pliers. Here a DIY guide.
Remove the two oval head screws on the lower edge of the backpanel.
Lift the panel up.