Skip to main content

Free Shipping on Domestic Orders $75+

Jeans 2-Hole Button Replacement

Views: 4K

View statistics:

Past 24 Hours:
4
Past 7 Days:
37
Past 30 Days:
175
All Time:
3,983
Comments: 1

1 guide comment.

Go to guide comments
Completed: 2

2 people have marked this guide "completed." Will you be next?

Favorites: 0

No one has favorited (and subscribed to) this guide. Will you be the first?

Time Required: 10 - 20 minutes
Difficulty: Easy
Jeans 2-Hole Button Replacement

Introduction

Go to step 1 ↓

This is a simple repair of adding a two-hole button onto a pair of jeans. This repair requires a needle, thread, fabric scissors, and a fabric marker. After following the steps in this guide, a two-hole button should be firmly attached to a pair of jeans. Keep in mind that the needle being used in sharp and is hard to spot if dropped.

Is a two-hole button just not looking how you’d like? Here is a link to re-attach a four-hole button! Sew a Button

What you need

    1. Jeans 2-Hole Button Replacement, 2-Hole Button: step 1, image 1 of 1
      • Find a thread color that matches the fabric you are sewing the button on to.

      Ask FixBot

      Add Comment

    2. Jeans 2-Hole Button Replacement: step 2, image 1 of 1
      • Loop the thread through the eye of the needle.

      • Tie a small knot around the eye of the needle with the thread.

      • Make sure the knot is tight!

      Ask FixBot

      Add Comment

    3. Jeans 2-Hole Button Replacement: step 3, image 1 of 1
      • Thread the needle through the fabric from the inside out.

      • Tie a knot at the end of the thread after pulling most of it through the fabric.

      Ask FixBot

      Add Comment

    4. Jeans 2-Hole Button Replacement: step 4, image 1 of 3 Jeans 2-Hole Button Replacement: step 4, image 2 of 3 Jeans 2-Hole Button Replacement: step 4, image 3 of 3
      • Sew the thread in a small 'x' where you would like to place the button.

      • If you don't want to sew, then mark the spot with a white fabric marker.

      Ask FixBot

      Add Comment

    5. Jeans 2-Hole Button Replacement: step 5, image 1 of 3 Jeans 2-Hole Button Replacement: step 5, image 2 of 3 Jeans 2-Hole Button Replacement: step 5, image 3 of 3
      • Place the button over the small stitched 'x' or fabric marker spot.

      • Thread the needle through the left hole of the button from the inside out.

      • Pull the needle and thread all the way through the fabric.

      • If you can't find the hole of the button, thread the needle through the fabric first and then through the button hole.

      Ask FixBot

      Add Comment

    6. Jeans 2-Hole Button Replacement: step 6, image 1 of 3 Jeans 2-Hole Button Replacement: step 6, image 2 of 3 Jeans 2-Hole Button Replacement: step 6, image 3 of 3
      • Cross the needle over to the right hole of the button.

      • Thread the needle all the way through the fabric.

      • This step creates the first stitch.

      Ask FixBot

      Add Comment

    7. Jeans 2-Hole Button Replacement: step 7, image 1 of 1
      • Repeat Steps 6-7 four to five times, until you have a secure button.

      Ask FixBot

      Add Comment

    8. Jeans 2-Hole Button Replacement: step 8, image 1 of 1
      • Create a thread shank on the inside of the fabric by looping the thread around a stitch.

      • Pull the thread all the way through the hole until it is tight.

      • Repeat this 2-3 times.

      • Tie a knot after the final stitch to secure the stitches.

      Ask FixBot

      Add Comment

    9. Jeans 2-Hole Button Replacement: step 9, image 1 of 2 Jeans 2-Hole Button Replacement: step 9, image 2 of 2
      • Use fabric scissors to cut off excess thread.

      Ask FixBot

      Add Comment

Conclusion

After cutting the remaining thread, your button stays on your jeans.

Cancel: I did not complete this guide.

2 other people completed this guide.

1 Guide Comment

Very, very good!

Gabriel Ganzan - Reply Share

Add Comment

View Statistics:

Past 24 Hours: 4

Past 7 Days: 37

Past 30 Days: 175

All Time: 3,983