JBL Tune 510BT Faceplate Replacement - iFixit Repair Guide

Free Shipping on Domestic Orders $75+

What you need

1. Step 1 Faceplate
  Firmly grasp the earmuff and pull away from the center until the lip of the earmuff is disengaged.
  
  Pull the earmuff towards the center of the headphones until it is free.
  Edit
  
  Ask FixBot
  
  Add Comment
  
  1024
3. Step 2
  Remove the three 3 mm screws using a JIS #00 screwdriver.
  Edit
  
  Ask FixBot
  
  Add Comment
  
  1024
4. Step 3
  Carefully remove the faceplate by lifting it firmly.
  
  Avoid rough movements, as there is a single thin wire connecting the faceplate to the internals.
  
  If the repair is for the right-side driver, be mindful of the charging port, as the faceplate has a slot there for it. Lift the opposite end and back the port out.
  
  To completely detach the faceplate, desolder the wires from the connections on the motherboard.
  Edit
  
  Ask FixBot
  
  Add Comment
  
  1024

Conclusion

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

with 2 other contributors

Ryan

Member since: 01/30/24

648 Reputation

4 Guides authored

+10 more badges

Team

Utah Tech University, Team 1-2, McMurrin Spring 2024 Member of Utah Tech University, Team 1-2, McMurrin Spring 2024

UTAHTECH-MCMURRIN-S24S1G2

2 Members

23 Guides authored

0 Guide Comments

View Statistics:

Past 24 Hours: 3

Past 7 Days: 14

Past 30 Days: 68

All Time: 1,111