Insignia NSD9PDVD15 Screen Replacement
Jen Rodas and 8 other contributors
Last updated on Jan 3, 2024
Views: 768
View statistics:
- Past 24 Hours:
- 0
- Past 7 Days:
- 0
- Past 30 Days:
- 23
- All Time:
- 768
Comments: 0
No one has left comments on this guide. Will you be first?
Go to guide commentsCompleted: 0 1
No one has marked this guide "completed." Will you be the first?
1 person has marked this guide "completed." It's you — great job!
Favorites: 0 1
No one has favorited (and subscribed to) this guide. Will you be the first?
1 person has favorited (and subscribed to) this guide — and that's you!
Needs Better Images
Better photos will improve this guide. Help out by taking, editing, or uploading new ones!
Missing Details
Some of this guide's details are missing. Help users by adding tools, difficulty, or time.
What you need
Parts
Tools
-
-
-
Slide the “Open” tab on the top of the device.
-
This will allow you to open the device.
Ask FixBot
-
-
-
Remove the two screws from the hinge that holds together the screen casing and the disk panel.
-
-
-
Insert the plastic opening tool into the rectangular holes and pry open in order to access the interior of the screen casing.
-
Remove the four screws and corresponding washers from the edges of the screen.
-
Use a plastic opening tool to prop open if necessary.
-
-
-
-
Unplug the red wires from the motherboard by gently pulling them off.
-
Then remove the screen.
-
-
To reassemble your device, follow these instructions in reverse order.
Team
Ohio State, Team 2-5, Garvin Fall 2015 Member of Ohio State, Team 2-5, Garvin Fall 2015
OSU-GARVIN-F15S2G5
3 Members
12 Guides authored
