Insignia NS-CLOPP2 Screen Replacement
Dilini De Silva and 7 other contributors
Last updated on Jan 10, 2025
Views: 754
View statistics:
- Past 24 Hours:
- 2
- Past 7 Days:
- 14
- Past 30 Days:
- 93
- All Time:
- 754
Comments: 0
No one has left comments on this guide. Will you be first?
Go to guide commentsCompleted: 3 4
3 people have marked this guide "completed." Will you be next?
4 people have marked this guide "completed." Including you — great job!
Favorites: 0 1
No one has favorited (and subscribed to) this guide. Will you be the first?
1 person has favorited (and subscribed to) this guide — and that's you!
Missing Steps
Oops! This guide is currently missing one or more important steps.
Better Introduction
Improve this guide by completing or revising its introduction.
Introduction
Go to step 1 ↓Outline what you are going to teach someone how to do.
What you need
Tools
-
-
-
Turn the clock over and remove the 1cm screw with a Philips head screwdriver, which is located below the faceplate, on the bottom of the clock.
Ask FixBot
-
-
-
Once you are able to create a space in between the device and the front screen, use your hands to continue to pry off the screen. Make sure that all the mini latches surrounding the perimeter have been unlatched, allowing the screen to come off easily.
-
-
-
-
Once you have undone the latches and pried off the first half of the screen, use your hand to pull off the rest of the screen.
-
-
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
3 other people completed this guide.
Team
Marist, Team 1-1, Laflen Spring 2015 Member of Marist, Team 1-1, Laflen Spring 2015
MARS-LAFLEN-S15S1G1
2 Members
60 Guides authored
