InFocus IN3114 Top Plate Replacement
Thomas E Bugg and 3 other contributors
Last updated on Jan 10, 2025
Views: 386
View statistics:
- Past 24 Hours:
- 2
- Past 7 Days:
- 6
- Past 30 Days:
- 62
- All Time:
- 386
Comments: 0
No one has left comments on this guide. Will you be first?
Go to guide commentsCompleted: 1 2
1 person has marked this guide "completed." Will you be next?
2 people have marked this guide "completed." Including you — great job!
Favorites: 0 1
No one has favorited (and subscribed to) this guide. Will you be the first?
1 person has favorited (and subscribed to) this guide — and that's you!
Introduction
Go to step 1 ↓Use this guide to replace the top plate of the InFocus 3114.
The top plate may be cracked and need replacing, but more often, this component requires removal in order to provide access to other components of the device such as the projector, such as the lamp, fan, lens, and DMD chip.
Properly performing this step is vital in repairing other components of the device.
What you need
Tools
-
-
-
Use a Phillips #1 screwdriver to remove the 1.2 cm Phillips-head screw from each side of the projector.
Ask FixBot
-
-
-
Use your hands to slide the top plate off of the projector.
-
Lift and remove the plate.
-
-
-
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Team
University of Alabama, Team 3-3, Bedsole Spring 2022 Member of University of Alabama, Team 3-3, Bedsole Spring 2022
UA-BEDSOLE-S22S3G3
4 Members
48 Guides authored
