Hytera TC-580 Keypad Replacement
Stuart and 5 other contributors
Last updated on May 7, 2024
Views: 860
View statistics:
- Past 24 Hours:
- 0
- Past 7 Days:
- 8
- Past 30 Days:
- 70
- All Time:
- 860
Comments: 0
No one has left comments on this guide. Will you be first?
Go to guide commentsCompleted: 2 3
2 people have marked this guide "completed." Will you be next?
3 people have marked this guide "completed." Including you — great job!
Favorites: 0 1
No one has favorited (and subscribed to) this guide. Will you be the first?
1 person has favorited (and subscribed to) this guide — and that's you!
Introduction
Go to step 1 ↓Remove the keypad of the TC-580. This will require serious disassembly of the radio. If you aren't able to get the buttons to work or the radio doesn't seem to respond properly to key presses you should consider doing this.
What you need
-
-
-
-
Tool used on this step:Tweezers$4.99
-
Remove the orange o-ring around volume knob using tweezers.
-
-
-
Remove grey nut from base of volume knob by turning it counterclockwise with a set of tweezers.
-
-
-
Remove the brass washer from the base of the antenna slot by turning it counterclockwise with a set of tweezers.
-
-
-
-
Using a plastic opening tool, pry in between the plastic case and metal circuit board to remove the board.
-
Ask FixBot
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
2 other people completed this guide.
Team
USF Tampa, Team S3-G4, Nance Spring 2018 Member of USF Tampa, Team S3-G4, Nance Spring 2018
USFT-NANCE-S18S3G4
3 Members
60 Guides authored
